|D||Roof support to retain chimney|
|E||Twin wall to single wall adaptor|
|F||Single wall flue pipe. Twin wall is also suitable|
|G||Wall support. Retains internal flue|
|I||Flue starter kit|
|J||Flue to adaptor|
|K||Debris trap for falling soot (with water drain point in the end cap)|
|L||Flue support stand|
Single wall chimney may be used inside a building however we would recommend twin-wall insulated chimney.
Good access for cleaning must be included in the chimney system.
The weight of the chimney should be supported by a stand and not the rear of the appliance.
These should be kept to a minmium. Where a bend is needed it should be of no more than 45deg.
We do not recommend a chimney cowl as this can slow the volume of flue gasses. We recommed a cap of the connecting T pipe to include a drain point. This drain will allow any excess rain which enters chimney to exit the chimney system.
There are several different methods to pass through a roof.